What's up party people?

What's up party people?

Postby zambiland » Fri Jan 17, 2014 11:34 pm

Seems kinda quiet around here. What's new with y'all?
zambiland
Senior Member
 
Posts: 531
Joined: Fri Nov 24, 2006 12:13 pm
Location: Boulder CO

Re: What's up party people?

Postby ccw3432 » Fri Jan 17, 2014 11:46 pm

Yes, we're due for a good build thread to watch and drool over. :P
User avatar
ccw3432
Steal Your Face
Steal Your Face
 
Posts: 212
Joined: Sat Jul 28, 2012 6:11 pm
Location: Three Rivers, CA

Re: What's up party people?

Postby moonliner » Tue Jan 21, 2014 2:39 am

I'd love to post pics of my Guild Starfire that Alembic is modding, but they've hardly touched it in over a year...... I'm told there will be action by February. We'll see......
Last edited by moonliner on Fri Jan 24, 2014 12:47 am, edited 1 time in total.
moonliner
tiger
tiger
 
Posts: 23
Joined: Mon Oct 01, 2012 1:24 pm

Re: What's up party people?

Postby moonliner » Wed Jan 22, 2014 2:14 am

On a positive note, I found that putting Thomastik flatwounds on my Rickenbaker v63 has given me the closest tone to early 70's Phil I've ever had. I was stunned.... there were moments where I was hearing Bertha tone, both with fingers and with a pick. I'll definitely be putting them on my Starfire!
moonliner
tiger
tiger
 
Posts: 23
Joined: Mon Oct 01, 2012 1:24 pm

Re: What's up party people?

Postby zambiland » Wed Jan 22, 2014 11:52 am

moonliner wrote:I'd love to post pics of my Guild Starfire that Alembic is modding, but they've hardly ouched it in over a year...... I'm told there will be action by February. We'll see......


It will go like that for a while and then all of a sudden, boom. When the were overhauling my Series I, it was 18 months before it got touched. I think they had to cogitate for a while about how to go about cutting the omega. Finally, an old employee returned and they made him do it (or he volunteered.).
zambiland
Senior Member
 
Posts: 531
Joined: Fri Nov 24, 2006 12:13 pm
Location: Boulder CO

Re: What's up party people?

Postby tigerstrat » Wed Jan 22, 2014 12:11 pm

Let's see... I blew up my Ashly power amp recently. Shorted the speaker terminals accidentally? Not sure, but wow I really torched one of the boards to hell. I have now joined the Tubeworks crowd with a MosValve MV-942 I picked up on the cheap. No change in the sound that I can detect, although the Presence can add very subtle coloration. I leave it at about 1:00.
"There, in huge black letters, was 'The Grateful Dead'. It just... cancelled my mind out."-Garcia
User avatar
tigerstrat
Senior Member
 
Posts: 4628
Joined: Wed Nov 30, 2005 1:20 pm
Location: Portland,OR

Re: What's up party people?

Postby tcsned » Thu Jan 23, 2014 4:48 am

tigerstrat wrote:Let's see... I blew up my Ashly power amp recently. Shorted the speaker terminals accidentally? Not sure, but wow I really torched one of the boards to hell. I have now joined the Tubeworks crowd with a MosValve MV-942 I picked up on the cheap. No change in the sound that I can detect, although the Presence can add very subtle coloration. I leave it at about 1:00.


Those are nice amps the difference between it and my Mac are pretty darn subtle
User avatar
tcsned
Senior Member
 
Posts: 2676
Joined: Sat Mar 21, 2009 2:50 pm
Location: Blacksburg, VA

Re: What's up party people?

Postby Rusty the Scoob » Thu Jan 23, 2014 6:49 am

Thomastiks are killer strings! Had them on my starfire for a while and will again soon, and they're on my fretless. I wish they made 34" scale in .45-.105, that's my only complaint.

All my builds lately have been non-phil related... Got a nice Warmoth-body, Fender AM-Standard necked J-bass with EMG JVX pickups (exposed pole pieces, very classic tone but zero hum) an an Aguilar OBP-3 band preamp that rocks pretty hard. It's a killer classic J with some tone shaping. No real reason for building it, just acumulated the body and then the neck came my way, so I had it finished up.

Also built the Disco Bass, my 3rd try at the Ultimate John Kahn bass. Fender AM-Standard maple neck, Warmoth swamp ash P/J-body, natural finish with a black PG and a Badass II bridge - looks like a stock 70's Fender with the classic 70's mods, but I also managed to fit in an ACG with a by-pass switch.
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2298
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Re: What's up party people?

Postby Sparechaynge » Thu Jan 23, 2014 1:08 pm

Rusty Wrote:
"Also built the Disco Bass, my 3rd try at the Ultimate John Kahn bass. Fender AM-Standard maple neck, Warmoth swamp ash P/J-body, natural finish with a black PG and a Badass II bridge - looks like a stock 70's Fender with the classic 70's mods, but I also managed to fit in an ACG with a by-pass switch."


This sounds awesome. Can we hear it?

How's the EB3 build going?
Is this a 70's bass or a 00's PC...or a Moon Lander? (It's a moon lander) - Tigerstrat
User avatar
Sparechaynge
Ice Cream!
Ice Cream!
 
Posts: 120
Joined: Tue Sep 18, 2012 5:18 pm

Re: What's up party people?

Postby Rusty the Scoob » Fri Jan 24, 2014 9:17 am

Haven't gotten a really good recording yet... It's been on one gig since the ACG went in and it's a terrible room for bass - just a big cube. Not sure I'm totally sold on the classic Ceramic-magnet EMG in there either, might try Ceramic/Steel or Alnico instead. Sounds awesome at home but may not translate to live the way I like. Really my black/white/maple P with the EMGs and Michael Pope is probably still the best for big rooms.

EB3 has stalled thanks to me being lazy.... finally got the bridge and tailpiece done, just need to modify the shims my dad made for the Dark Stars, clean up the corrosion off the frets, and wire it up. One good Saturday should have it playable, then I have to figure out some cool electronics for it. It's really going to be pretty awesome... totally not sharing pics for now...
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2298
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Re: What's up party people?

Postby moonliner » Sat Jan 25, 2014 12:44 am

I look forward to seeing how the EB build goes..... time permitting.

I'm kind of excited about the reissue Guild M85. A few years ago I passed on buying a vintage M85 because I was saving up for a Starfire. Usually when I practice restraint I end up regretting it later. This Newark Street M85 could help me get over not buying that vintage one..... and could help with the waiting for the Starfire to come to fruition.
moonliner
tiger
tiger
 
Posts: 23
Joined: Mon Oct 01, 2012 1:24 pm

Re: What's up party people?

Postby Rusty the Scoob » Mon Jan 27, 2014 7:35 am

I saw those! Glad they're putting out new stuff, finally. A friend pointed out that they screwed up the horns on the new Starfire - not the imported ones, but the ones built in CT have really weird rounded horns.
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2298
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Re: What's up party people?

Postby moonliner » Mon Jan 27, 2014 4:46 pm

The Newark Street ones are fine, but yeah, the fancy American made ones look like Gibsons. Doh!
moonliner
tiger
tiger
 
Posts: 23
Joined: Mon Oct 01, 2012 1:24 pm

Re: What's up party people?

Postby Rusty the Scoob » Tue Jan 28, 2014 8:39 am

Oh! I got the model names mixed up. I really like my Korean-made DeArmond Starfire... it's pretty far from stock electronically but the neck and body are untouched and it's a really good bass. I bet the new ones will be even better.

On another random bass topic... I'm pretty close to pulling the trigger on one of these:

Image

http://www.musiciansfriend.com/bass/pal ... 0431415387

I'm decent enough at upright to do a basic Garcia/Kahn type show but would like to get more into it, learn thumb position, etc. I have a pretty nice carved Czech upright that my father in law either gave or long-term loaned to me (I'm not really sure which) but it's so inconsistent and needs some serious repairs. It's like trying to learn to drive with one of your car's wheels halfway falling off. If tomorrow night's acoustic duo gig goes well, I'm ordering it on Thursday.
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2298
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA


Return to Phil Sound

Who is online

Users browsing this forum: No registered users and 1 guest