using a power amp with a Boogie combo?

using a power amp with a Boogie combo?

Postby Deadhead85 » Mon Dec 12, 2016 1:51 pm

I have a Mesa Boogie MKI combo, and am throwing around the idea of adding a power amp. I know its capable of being done, as the Dead have done in the past. I was wondering though, how it would be done? What would it consist of? Any modding to the amp head needed? Thanks yall!
Deadhead85
Wavy Gravy
Wavy Gravy
 
Posts: 100
Joined: Wed Jun 29, 2011 11:55 am

Re: using a power amp with a Boogie combo?

Postby hippieguy1954 » Mon Dec 12, 2016 1:59 pm

Does it have an effects send output?
Jim

First show: 1973
Last show: 1994
User avatar
hippieguy1954
Senior Member
 
Posts: 1967
Joined: Thu Mar 24, 2011 1:29 pm
Location: Upstate, NY

Re: using a power amp with a Boogie combo?

Postby Deadhead85 » Mon Dec 12, 2016 2:10 pm

Yes is does. I currently use the effects loop for a Rocktron Hush IIB for noise control.
Deadhead85
Wavy Gravy
Wavy Gravy
 
Posts: 100
Joined: Wed Jun 29, 2011 11:55 am

Re: using a power amp with a Boogie combo?

Postby hippieguy1954 » Mon Dec 12, 2016 3:05 pm

Deadhead85 wrote:Yes is does. I currently use the effects loop for a Rocktron Hush IIB for noise control.


The effects loop "send" is a line out of the preamp section of the combo. If it is line level (which it probably is), you can run an instrument cable from the send to any external power amp. The return would not be used. That goes to the power section of the combo. Also, you do not want anything between the line out of the send and the power amp you use.
Jim

First show: 1973
Last show: 1994
User avatar
hippieguy1954
Senior Member
 
Posts: 1967
Joined: Thu Mar 24, 2011 1:29 pm
Location: Upstate, NY

Re: using a power amp with a Boogie combo?

Postby mkaufman » Mon Dec 12, 2016 3:43 pm

I have a Mark I head and have looked into using a McIntosh power amp. I've read, and have been told that you can't leave the Mark I speaker out disconnected without risking damaging the amp. I think there's a device which can be connected to absorb the load?

ace
THE best way to score gear: http://www.auctionstud.com

For discounts on extended Dell warranties: http://www.advantech-ny.com/DellComputerWarranty/
mkaufman
Senior Member
 
Posts: 1631
Joined: Tue Oct 02, 2007 6:26 pm

Re: using a power amp with a Boogie combo?

Postby TI4-1009 » Mon Dec 12, 2016 3:47 pm

For my Jerry stuff I go out the effects loop of my Mesa Lonestar Classic to my MC50, from there to my JBL cab. Works fine.

I don't know how critical it is, but I make sure to keep a speaker plugged in to the Mesa combo so the power section sees a load- even though the signal isn't going through the power section. I can't remember if that's more important with tube or solid state?
"Do not write so that you can be understood, write so that you cannot be misunderstood." -Epictetus

First show: 8/16/69 (Woodstock)
Last show: 3/19/95 (Unbroken Chain breakout)
Member of the Four-Decade Club
Charter Member, President & CEO of OAD (Order of the Ancient Deadheads)
User avatar
TI4-1009
Senior Member
 
Posts: 2004
Joined: Fri Aug 20, 2010 6:27 am
Location: Upstate NY- Toodaloo

Re: using a power amp with a Boogie combo?

Postby pablomago » Tue Jan 17, 2017 11:04 pm

My MK I RI has a Slave out which comes off the output transformer. That's what I'd use to run a power amp.
pablomago
Brent
Brent
 
Posts: 90
Joined: Wed Apr 17, 2013 2:16 pm

Re: using a power amp with a Boogie combo?

Postby TI4-1009 » Wed Jan 18, 2017 3:22 pm

pablomago wrote:My MK I RI has a Slave out which comes off the output transformer. That's what I'd use to run a power amp.


Just a caution that the slave output jack is the signal from the preamp and the power amp. It's a lot more powerful than the measly little preamp signal and it would include any tone shaping that the power amp section might add. If you just want the preamp, use the loop out and- as always- read the manual. Boogie manuals are pretty detailed. And be sure your nice expensive Mac can handle that big signal before you....
"Do not write so that you can be understood, write so that you cannot be misunderstood." -Epictetus

First show: 8/16/69 (Woodstock)
Last show: 3/19/95 (Unbroken Chain breakout)
Member of the Four-Decade Club
Charter Member, President & CEO of OAD (Order of the Ancient Deadheads)
User avatar
TI4-1009
Senior Member
 
Posts: 2004
Joined: Fri Aug 20, 2010 6:27 am
Location: Upstate NY- Toodaloo


Return to Bobby Tone

Who is online

Users browsing this forum: No registered users and 2 guests