tatittle wrote:I thought the stratoblaster had a buffer in it already? If so, a buffer alone would be different, but depending on the buffers, both would pretty much be stratoblaster alone.
I thought the stratoblaster had a buffer in it already? If so, a buffer alone would be different, but depending on the buffers, both would pretty much be stratoblaster alone.
waldo041 wrote:That diagram allows for the Blaster to be placed after the OBEL before the Volume pot->Output. Or it can be placed before the OBEL. You can also place it inbetween the Volume pot and Output jack as they are wired stock. Not sure how, or if, the 25k pot will have any adverse effect to the blaster. It was designed to have a 250k pot(high impedance) in front of it. I am pretty sure it will be just fine though.
Here is another option if someone wanted to use one or the other by themselves. Just remember you'll want a 1meg pulldown resistor from the output to ground for the blaster.
milobender wrote:I just use a combination 25K pot/dpdt switch (pull up for passive selection)... it works fine. Then I use a 3pdt switch for the Buffer/Blaster selection... you can use a dpdt if you want. I use the 3p so I can add a LED indicator.
Return to Jerry Tone
Users browsing this forum: No registered users and 5 guests