Counterstriker wrote:I really like the idea of the pedal knobs, Do you have a smaller picture of his pedal set up I can't see the whole thing, I'm wondering how he did is so cleanly.
snake cable with stereo plugs
1.) remove the pot and place it's wires on a stereo jack.
2.) place the pot removed in a remote box and use one channel end of the snake cable to wire that pot in the remote box.
3.) plug that channels plug into the stereo jack you wired up in step 1.
4.) repeat process with the next pedal/pot.
(note: i would substitute a 14b switching stereo jack and buy a new, same value/taper pot instead of removing the original pot for the remote box. wired correctly and the original pot works in the pedal with nothing in the remote jack. place a plug in the remote jack it disengages the pedals pot and engages the remote pot. this allows the pedal board to be used without the remote box)