OBEL Repair

Sell and buy at your own risk...

OBEL Repair

Postby 1dallek1 » Thu Dec 08, 2011 11:48 pm

If your OBEL doesn’t look like this it can, this is just a quick touch-up, all wiring replaced with Teflon coated wire, reinforced connections. the customer will be getting the full job after the holidays, new buffer, bourns pots graphite shielded cavity and more

http://a2.ec-images.myspacecdn.com/imag ... f82a/l.gif

http://a1.ec-images.myspacecdn.com/imag ... f55b/l.jpg

These are available on a limited basis $65, due to solid positive feedback i can offer these with a money back policy if you are not happy, excluding shipping. these are made with quality parts including Connectors by (Phoenix Contact) point to point with high quality buss wire, and an elegant interpretation of the original design. i wouldn't let a little commotion get in the way of your sound.

http://a4.ec-images.myspacecdn.com/imag ... 1d2b/l.jpg

http://a4.ec-images.myspacecdn.com/imag ... 0268/l.jpg

here's what the customer had to say

So I played it with my Dead band on Thursday night. Its was my first time to put her threw her paces. Right off the bat she is much louder than she was! So that pickup adjustment was great. It was like relearning to ride a bike. The sound is different with that updated buffer too. Much stronger and tighter.

The volume pot also had me relearning. I don't know if that's strange for such a simple design but dialing in the sweet spots and what not took me a couple of songs in and still at the end of the night I was finding new things.

And you were right about those patch cables. I am tossing them all and getting some new ones. And I haven't had a chance putting my Qtron through it. This week!

for info
Dallek@nyc.rr.com
Attachments
Final.jpg
Final.jpg (107.18 KiB) Viewed 555 times
Last edited by 1dallek1 on Wed Dec 14, 2011 6:53 pm, edited 14 times in total.
!!! ALWAYS WEAR EYE PROTECTION !!!
User avatar
1dallek1
Blues for Allah
Blues for Allah
 
Posts: 81
Joined: Thu Jun 09, 2011 10:06 am

Re: OBEL Repair

Postby mkaufman » Fri Dec 09, 2011 6:00 am

Nice wiring job! Looks like an Ibanez Musician??

Where are you located?

tnx,
mk
THE best way to score gear: http://www.auctionstud.com

For discounts on extended Dell warranties: http://advantech-ny.com/mik/advantech/DellComputerWarranty
mkaufman
Senior Member
 
Posts: 1342
Joined: Tue Oct 02, 2007 6:26 pm

Re: OBEL Repair

Postby Rusty the Scoob » Fri Dec 09, 2011 7:40 am

Have you paid Waldo for the buffer yet?





viewtopic.php?f=334&t=10571&p=101276#p101276
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2294
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Re: OBEL Repair

Postby myoung6923 » Fri Dec 09, 2011 9:30 am

Rusty the Scoob wrote:Have you paid Waldo for the buffer yet?
viewtopic.php?f=334&t=10571&p=101276#p101276



:lol:
All we have to decide is what to do with the time that is given us

http://www.fennario.us
http://www.youtube.com/fennarioband
http://www.facebook.com/fennarioband
User avatar
myoung6923
Senior Member
 
Posts: 820
Joined: Thu Feb 09, 2006 11:47 am
Location: South Shore, MA

Re: OBEL Repair

Postby myoung6923 » Fri Dec 09, 2011 9:35 am

You have to admit - if nothing else, the guy has some enormous balls to continue posting here. After ripping off one of the best contributing members here, and after lying and posting fake things from a different account - AND being busted for it by the admins - and then STILL hawking his deceptively obtained buffer design.

Jesus dude, I'm surprised you can walk around at all with balls that big!

And the honest question to you is -

after all of the sleazy things you have done around here, why would anybody give you any business at all?

Why don't you take your sleazy business somewhere other than where you are NOT wanted?

:fu:
All we have to decide is what to do with the time that is given us

http://www.fennario.us
http://www.youtube.com/fennarioband
http://www.facebook.com/fennarioband
User avatar
myoung6923
Senior Member
 
Posts: 820
Joined: Thu Feb 09, 2006 11:47 am
Location: South Shore, MA

Re: OBEL Repair

Postby 1dallek1 » Fri Dec 09, 2011 10:00 am

mkaufman wrote:Nice wiring job! Looks like an Ibanez Musician??

Where are you located?

tnx,
mk


thats right, good eye, this guitar went to several repair people and was basically a money pit, it never worked, i rewired it, repaired a pickup, overnight with parts for 175, in in queens, ny
thanks, good work speaks for itself
ns
!!! ALWAYS WEAR EYE PROTECTION !!!
User avatar
1dallek1
Blues for Allah
Blues for Allah
 
Posts: 81
Joined: Thu Jun 09, 2011 10:06 am

Re: OBEL Repair

Postby 1dallek1 » Fri Dec 09, 2011 12:29 pm

myoung6923 wrote:You have to admit - if nothing else, the guy has some enormous balls to continue posting here. After ripping off one of the best contributing members here, and after lying and posting fake things from a different account - AND being busted for it by the admins - and then STILL hawking his deceptively obtained buffer design.

Jesus dude, I'm surprised you can walk around at all with balls that big!

And the honest question to you is -

after all of the sleazy things you have done around here, why would anybody give you any business at all?

Why don't you take your sleazy business somewhere other than where you are NOT wanted?

:fu:


"Jesus dude" I like that, ok ill accept that tidal,
so I take it that you can provide this kind of quality work, is that correct?
should I be sending people to you?
honestly I would guess you can't do anything other than sit at your computer and poke sticks at people right. please post a sampel of your work
!!! ALWAYS WEAR EYE PROTECTION !!!
User avatar
1dallek1
Blues for Allah
Blues for Allah
 
Posts: 81
Joined: Thu Jun 09, 2011 10:06 am

Re: OBEL Repair

Postby Rusty the Scoob » Fri Dec 09, 2011 1:07 pm

1dallek1 wrote:"Jesus dude" I like that, ok ill accept that tidal,
so I take it that you can provide this kind of quality work, is that correct?
should I be sending people to you?
honestly I would guess you can't do anything other than sit at your computer and poke sticks at people right. please post a sampel of your work


Actually his guitar electronic work is top notch and he can play and sing with the best of them.

Can you answer the one simple question that I posted above?
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2294
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Re: OBEL Repair

Postby NWPines » Fri Dec 09, 2011 1:11 pm

Is the quality of your work on par with your lack of character, class, honesty, and integrity (not to mention spelling and grammar)???
NWPines
Brent
Brent
 
Posts: 88
Joined: Fri May 28, 2010 3:48 pm
Location: Corvallis, OR

Re: OBEL Repair

Postby 1dallek1 » Fri Dec 09, 2011 1:34 pm

NWPines wrote:Is the quality of your work on par with your lack of character, class, honesty, and integrity (not to mention spelling and grammar)???


Absolutely ! look at the picture, by the way can we see your work while we are at it?

just a suggestion someone should call your care giver so you can be turned and the wet spot cleaned
!!! ALWAYS WEAR EYE PROTECTION !!!
User avatar
1dallek1
Blues for Allah
Blues for Allah
 
Posts: 81
Joined: Thu Jun 09, 2011 10:06 am

Re: OBEL Repair

Postby strumminsix » Fri Dec 09, 2011 2:04 pm

1dallek1 wrote:
NWPines wrote:Is the quality of your work on par with your lack of character, class, honesty, and integrity (not to mention spelling and grammar)???


Absolutely ! look at the picture, by the way can we see your work while we are at it?

just a suggestion someone should call your care giver so you can be turned and the wet spot cleaned

This forum is for the sharing of musical ideas, talk about the Dead and other music, and a place for musicians in general.

We are here because of common musical interests and the ability to be among friends and chat about these interests.

We don't need people who are here to constantly insult.

Let's face it, 1dallek1, your visits here have only been to promote your business and when that doesn't work, insult members.

Why don't you chill out and quit with the insults and give my inbox a rest from queries on why you aren't banned.
User avatar
strumminsix
Senior Member
 
Posts: 6641
Joined: Tue Apr 05, 2005 8:13 am
Location: Chicago

Re: OBEL Repair

Postby 1dallek1 » Fri Dec 09, 2011 2:06 pm

strumminsix wrote:
1dallek1 wrote:
NWPines wrote:Is the quality of your work on par with your lack of character, class, honesty, and integrity (not to mention spelling and grammar)???


Absolutely ! look at the picture, by the way can we see your work while we are at it?

just a suggestion someone should call your care giver so you can be turned and the wet spot cleaned

This forum is for the sharing of musical ideas, talk about the Dead and other music, and a place for musicians in general.

We are here because of common musical interests and the ability to be among friends and chat about these interests.

We don't need people who are here to constantly insult.

Let's face it, 1dallek1, your visits here have only been to promote your business and when that doesn't work, insult members.

hey doofy maby you cant read i didnt start the insults, can we see your work?

Why don't you chill out and quite with the insults and give my inbox a rest from queries on why you aren't banned.
!!! ALWAYS WEAR EYE PROTECTION !!!
User avatar
1dallek1
Blues for Allah
Blues for Allah
 
Posts: 81
Joined: Thu Jun 09, 2011 10:06 am

Re: OBEL Repair

Postby myoung6923 » Fri Dec 09, 2011 2:09 pm

1dallek1 wrote:
myoung6923 wrote:You have to admit - if nothing else, the guy has some enormous balls to continue posting here. After ripping off one of the best contributing members here, and after lying and posting fake things from a different account - AND being busted for it by the admins - and then STILL hawking his deceptively obtained buffer design.

Jesus dude, I'm surprised you can walk around at all with balls that big!

And the honest question to you is -

after all of the sleazy things you have done around here, why would anybody give you any business at all?

Why don't you take your sleazy business somewhere other than where you are NOT wanted?

:fu:


"Jesus dude" I like that, ok ill accept that tidal,
so I take it that you can provide this kind of quality work, is that correct?
should I be sending people to you?
honestly I would guess you can't do anything other than sit at your computer and poke sticks at people right. please post a sampel of your work


Yep I can. After 13 years of troubleshooting and repairing biomedical equipment, and another 10 of the same with cellular telecom equipment - I'm pretty freaking good at electronics and have done the wiring on both of my Jerrified guitars.

And even though the buffers that I use I didn't personally build - there are already non-sleazy people that build them that I'm happy to support.

Why don't you keep shooting yourself in the foot hot shot.
All we have to decide is what to do with the time that is given us

http://www.fennario.us
http://www.youtube.com/fennarioband
http://www.facebook.com/fennarioband
User avatar
myoung6923
Senior Member
 
Posts: 820
Joined: Thu Feb 09, 2006 11:47 am
Location: South Shore, MA

Re: OBEL Repair

Postby strumminsix » Fri Dec 09, 2011 2:34 pm

strumminsix wrote:Let's face it, 1dallek1, your visits here have only been to promote your business and when that doesn't work, insult members.

1dallek1 wrote:hey doofy maby you cant read i didnt start the insults, can we see your work?

See, you just can't stop can you? You called me doofy without any provacation, others over PM, and then claim you didn't start with insults. Try again.

And why don't you stop with the juvenile, "can we see your work". You've failed at that about 100 times already.

What you don't seem to be able to understand is that your soldering iron skills aren't in question - your character, morals and ethics are.
User avatar
strumminsix
Senior Member
 
Posts: 6641
Joined: Tue Apr 05, 2005 8:13 am
Location: Chicago

Re: OBEL Repair

Postby 1dallek1 » Fri Dec 09, 2011 2:40 pm

Why don't you chill out and quite with the insults and give my inbox a rest from queries on why you aren't banned.[/quote][/quote]

i put a picture of a recent job, i do get jobs, i put the customer feedback, there was nothing provocative or insulting there, i have simply been replying in kind, to some unprovoked and uncalled for statements from people that can’t stick to the subject to begin with. you're a big boy you can read? how dare you a moderator take this position, if you don’t have something good to say, than don’t say anything. i was not the first to break that rule here. there is a higher rule though, all press is good press
!!! ALWAYS WEAR EYE PROTECTION !!!
User avatar
1dallek1
Blues for Allah
Blues for Allah
 
Posts: 81
Joined: Thu Jun 09, 2011 10:06 am

Next

Return to Garage Sale

Who is online

Users browsing this forum: No registered users and 2 guests